Pair of black steel toe work boots on a wooden floor

Chemical-Resistant PU Safety Boot S5

SKU: PPE-FT-606

Lightweight polyurethane boot with insulating sole for chemical plants, utilities and wet areas.

Designed to

EN ISO 20345 S5 CI SRC
EN 13832-3

Available on requestPrice on request

Quantity

Specifications

Material	Polyurethane
Toecap	Steel, 200 J
Midsole	Steel
Insulation	Cold insulated sole (CI)
Height	38 cm
Standards	EN ISO 20345 S5 CI SRC; EN 13832-3

Overview

Lightweight polyurethane boot with insulating sole for chemical plants, utilities and wet areas.

Specifications and certification details are confirmed in the quotation against the manufacturer's current datasheet. Contact our team for sizing, alternatives and documentation requirements.

Downloads

Technical datasheetPDF · 1.3 MB

Standards explained

EN ISO 20345 — Personal protective equipment: safety footwear
Covers safety footwear with a toecap tested to 200 J impact and 15 kN compression. Classes combine basic features so buyers can match footwear to wet, oily or penetration hazards.
Reading the marking: SB = basic toecap protection. S1 = closed heel, antistatic, heel energy absorption. S1P = S1 plus perforation resistance (PS or PL for non-metal inserts in the 2022 edition). S2 = S1 plus water penetration resistance. S3 = S2 plus perforation resistance and cleated outsole. S5 = polymer (moulded) S3 equivalent. In the 2022 edition S6 and S7 add whole-boot water resistance. Extra marks: HRO heat-resistant outsole (300 °C contact), HI heat insulation, CI cold insulation, WR water-resistant footwear, M metatarsal, SR (2022) or SRA/SRB/SRC (2011) slip resistance.
EN 13832-3 — Footwear protecting against chemicals: requirements for footwear highly resistant to chemicals
Covers boots tested for permeation by specified chemicals, typically used with chemical suits in hazmat response and chemical plants.

Images may be representative of the product type; specifications and standards are indicative. Final specification, certification and suitability for your application are confirmed in our written quotation and the manufacturer’s instructions for use.

Complete the solution

Equipment works best with the right support

ServiceSafety Equipment & PPE SupplyHead-to-toe PPE specified for the hazard, sized for your workforce and delivered with full documentation.ServiceInspection, Installation & MaintenancePPE and equipment inspection, extinguisher servicing, alarm installation, gas detector calibration coordination and replacement programmes.Training · 1 dayHazard Identification & Risk AssessmentIdentify hazards, evaluate risk and select effective controls using practical site examples.Training · Half dayPPE Selection, Use & CareSelect the right PPE for the hazard, read markings and inspect, store and replace it correctly.

Need this for a project or annual supply?

Send us your full list with quantities and delivery location — we’ll quote every line with documentation.

Submit an RFQ Contact Sales

Material

Polyurethane

Toecap

Steel, 200 J

Midsole

Steel

Insulation

Cold insulated sole (CI)

Height

38 cm

Standards

EN ISO 20345 S5 CI SRC; EN 13832-3

Standards explained

EN ISO 20345 — Personal protective equipment: safety footwear

Covers safety footwear with a toecap tested to 200 J impact and 15 kN compression. Classes combine basic features so buyers can match footwear to wet, oily or penetration hazards.

Reading the marking: SB = basic toecap protection. S1 = closed heel, antistatic, heel energy absorption. S1P = S1 plus perforation resistance (PS or PL for non-metal inserts in the 2022 edition). S2 = S1 plus water penetration resistance. S3 = S2 plus perforation resistance and cleated outsole. S5 = polymer (moulded) S3 equivalent. In the 2022 edition S6 and S7 add whole-boot water resistance. Extra marks: HRO heat-resistant outsole (300 °C contact), HI heat insulation, CI cold insulation, WR water-resistant footwear, M metatarsal, SR (2022) or SRA/SRB/SRC (2011) slip resistance.

EN 13832-3 — Footwear protecting against chemicals: requirements for footwear highly resistant to chemicals

Covers boots tested for permeation by specified chemicals, typically used with chemical suits in hazmat response and chemical plants.