Yellow fibreglass cap-style hard hat on a white background

Cap-Style Safety Helmet, Ratchet, ANSI Type I

SKU: PPE-HD-106

Front-peak HDPE helmet with 4-point suspension for general construction and plant work.

Standards

EN 397
ANSI/ISEA Z89.1 Type I Class E

In stockPrice on request

Option

Quantity

Specifications

Shell material	HDPE
Suspension	4-point textile
Adjustment	Ratchet, 52–64 cm
Accessory slots	30 mm side slots
Colours	White, yellow, orange, blue
Standards	EN 397; ANSI/ISEA Z89.1 Type I Class E

Standards explained

EN 397Industrial safety helmets
Sets requirements for top-impact shock absorption, penetration resistance and flame resistance of general industrial hard hats. It is the baseline European standard for construction, plant and site work.
Reading the marking: Optional marks show extra tested performance: -20 °C or -30 °C (very low temperature), +150 °C (very high temperature), 440 V AC (electrical insulation against brief accidental contact), LD (lateral deformation) and MM (molten metal splash).
ANSI/ISEA Z89.1American National Standard for industrial head protection
US standard for hard hats, frequently specified on projects run to US or international oil and gas specifications.
Reading the marking: Type I = top-impact protection; Type II = top and lateral impact. Class G = tested to 2200 V, Class E = tested to 20,000 V, Class C = no electrical protection. A reverse-donning symbol and HV (high-visibility) mark are optional.

Available options

Option	SKU	Details
White	PPE-HD-106-WH	Colour: White
Yellow	PPE-HD-106-YL	Colour: Yellow
Orange	PPE-HD-106-OR	Colour: Orange

Overview

Front-peak HDPE helmet with 4-point suspension for general construction and plant work.

Specifications and certification details are confirmed in the quotation against the manufacturer's current datasheet. Contact our team for sizing, alternatives and documentation requirements.

Downloads

Technical datasheetPDF · 595 KB

Images may be representative of the product type; specifications and standards are indicative. Final specification, certification and suitability for your application are confirmed in our written quotation and the manufacturer’s instructions for use.

Complete the solution

Equipment works best with the right support

ServiceSafety Equipment & PPE SupplyHead-to-toe PPE specified for the hazard, sized for your workforce and delivered with full documentation.ServiceInspection, Installation & MaintenancePPE and equipment inspection, extinguisher servicing, alarm installation, gas detector calibration coordination and replacement programmes.Training · 1 dayHazard Identification & Risk AssessmentIdentify hazards, evaluate risk and select effective controls using practical site examples.Training · Half dayPPE Selection, Use & CareSelect the right PPE for the hazard, read markings and inspect, store and replace it correctly.

Need this for a project or annual supply?

Send us your full list with quantities and delivery location — we’ll quote every line with documentation.

Submit an RFQ Contact Sales

Cap-Style Safety Helmet, Ratchet, ANSI Type I

SKU

PPE-HD-106

Front-peak HDPE helmet with 4-point suspension for general construction and plant work.

Standards

EN 397
ANSI/ISEA Z89.1 Type I Class E

Specifications

Shell material	HDPE
Suspension	4-point textile
Adjustment	Ratchet, 52–64 cm
Accessory slots	30 mm side slots
Colours	White, yellow, orange, blue
Standards	EN 397; ANSI/ISEA Z89.1 Type I Class E

Standards explained

EN 397Industrial safety helmets
Sets requirements for top-impact shock absorption, penetration resistance and flame resistance of general industrial hard hats. It is the baseline European standard for construction, plant and site work.
Reading the marking: Optional marks show extra tested performance: -20 °C or -30 °C (very low temperature), +150 °C (very high temperature), 440 V AC (electrical insulation against brief accidental contact), LD (lateral deformation) and MM (molten metal splash).
ANSI/ISEA Z89.1American National Standard for industrial head protection
US standard for hard hats, frequently specified on projects run to US or international oil and gas specifications.
Reading the marking: Type I = top-impact protection; Type II = top and lateral impact. Class G = tested to 2200 V, Class E = tested to 20,000 V, Class C = no electrical protection. A reverse-donning symbol and HV (high-visibility) mark are optional.

Available options

Option	SKU	Details
White	PPE-HD-106-WH	Colour: White
Yellow	PPE-HD-106-YL	Colour: Yellow
Orange	PPE-HD-106-OR	Colour: Orange

Overview

Front-peak HDPE helmet with 4-point suspension for general construction and plant work.

Specifications and certification details are confirmed in the quotation against the manufacturer's current datasheet. Contact our team for sizing, alternatives and documentation requirements.

Full-Brim Safety Helmet

PPE-HD-101

EN 397ANSI/ISEA Z89.1 Type I Class E

Available on request

Head Protection

Vented Cap-Style Safety Helmet

PPE-HD-102

EN 397 (-30 °C, LD, MM)

Available on request

White vented climbing helmet on a wooden surface

Head Protection

Electrical-Insulating Safety Helmet

PPE-HD-103

EN 50365 Class 0EN 397 440 V AC

Available on request

Personal Protective Equipment

One partner, end to end

Cap-Style Safety Helmet, Ratchet, ANSI Type I

Specifications

Standards explained

Available options

Overview

Downloads

Equipment works best with the right support