

High-Visibility ClothingPPE-HV-715
Hi-Vis Surveyor Vest with Pockets
EN ISO 20471 · ANSI/ISEA 107 Type

Catalog
Buying guide
PPE is the last line of defence after elimination, substitution and engineering controls, so it must match the hazards identified in your risk assessment. Good specifications name the standard and performance class, not just the product type. On hot industrial sites, comfort and heat strain decide whether PPE is actually worn.
List the hazards for each task or work area (impact, cut, chemical, noise, dust, fall, heat, electrical) and select PPE that addresses each one. Avoid issuing one kit to everyone when tasks differ.
Quote the standard and the performance level you need, for example EN 388 cut level C, EN 149 FFP3 or EN ISO 20345 S3. Ask for the declaration of conformity and the notified body certificate for Category III items such as respirators, fall arrest and chemical gloves.
Items worn together must not reduce each other's protection: spectacles can break an earmuff seal, and helmet-mounted accessories must be approved for the specific helmet. Test combinations before bulk ordering.
In summer temperatures above 45 °C, choose ventilated, lightweight and breathable options where the risk allows, and consider UV exposure, which shortens the life of plastics and fabrics.
Showing 49–72 of 76 products


High-Visibility ClothingPPE-HV-715
EN ISO 20471 · ANSI/ISEA 107 Type


High-Visibility ClothingPPE-HV-716
EN ISO 20471 · EN 343


Eye & Face ProtectionPPE-EY-203
EN 166 · ANSI Z87.1 D3




Foot ProtectionPPE-FT-607
EN ISO 20345














Eye & Face ProtectionPPE-EY-207
EN 166 · EN 169


Respiratory ProtectionPPE-RS-409
EN 12941






Fall ProtectionPPE-FP-807
EN 353-2






Fall ProtectionPPE-FP-803
EN 360 · ANSI Z359.14 Class


Foot ProtectionPPE-FT-608
Slip-on rubber overshoe with steel toe guard for visitors and short site tours.






Fall ProtectionPPE-FP-809
EN 360 · ANSI Z359.14 Class


Head ProtectionPPE-HD-107
ANSI/ISEA Z89.1 Type · EN 397
Provide a full size range, including smaller sizes, and train users on correct fitting, inspection and storage. Tight-fitting respirators need a fit test for each wearer.
Set inspection and replacement intervals based on manufacturer instructions and conditions of use, and record them for items such as harnesses, SCBA and insulating gloves.